Payment & Shipping Terms:
|Length Of LED Strip:||1.0M||Input Voltage:||DC 4.5V|
|Cases Material:||ABS Plastic||Beam Angle:||120°|
Powerful LED Light Strip for Car Trunk With Automatic On / Off Function for Car Trunk Cargo Area or Luggage Box Lighting
Features of Sunway SW-3199 LED Light Strip for Car Trunk:
1. 10pcs SMD2835 LEDs per strip, perfect for lighting up the entire trunk.
2. AA*3 square battery box + built-in control circuit + exterior LED strip, 3M velcro at the bottom of square box for easy installation.
3. Vertical sensor: turn left or right in a vertical direction, when the turning angle exceeds 40 degree, the light turns on automatically, reaction time is 2-3 seconds.
4. Horizontal sensor: turn up or down in a horizontal direction, when the turning angle exceeds 40 degree, the light turns on automatically, the reaction time is 2-3 seconds.
5. Rear velcro for box attachment.
6. 3pcs AA batteries, voltage 4.5V, standby life reaches up to more than 2 months, more than 16 hours continuous lighting services.
7. Double-sided tape included for easy installation, just peel and stick onto any flat surface.
8. Turn the switch to OFF position if not use in a long time, turn the button to ON position when use.
Applications of Sunway LED Light Strip for Car Trunk:
The LED Light Strip for Car Trunk is fantastic for luggage box lighting, car trunk cargo area or interior illumination, you can find everything you need without a flashlight.
Specifications of Sunway LED Light Strip for Car Trunk:
|Input Voltage||DC 4.5V|
|Input current||Max. 200mA|
|Working time||12-20 hours (deviated from battery quality and capacity)|
|Cases material||ABS plastic|
|Length of LED strip||1.0M|
|Package||Blister card package|
|Safety certification||CE, Rohs|
Control Box Installation:
a) As shown in the picture below, open the door and place the control box with its front side to the horizontal direction of the door axis, make sure the axis is horizontal direction, find the best position in the door to install considering easier operation in future.
b) Find the best position to install the Lights to make sure the best lighting condition of the strip, and the position should be interfered with by other objects.
c) Clean the installation place carefully to make sure dust free, 3M might peel off if the place is not clean.
d) Velcro installation: remove the backing paper and paste the velcro to the proper place, fix the control box well to the velcro.
e) LED Lights installation: remove the backing paper, paste the Lights under proper force to make sure it is pasted well.
f) Connect the DC connector to the control box and sort out the cable properly to make sure the space is tidy and beautiful.
g) Make sure batteries available and right anode and cathode in the control box before use.
h) Turn the switch to ON position after installation, the light turns on and off automatically when open and close the door, the reaction time is 2-3 seconds.
i) Battery replacement: disconnect the DC cable, remove the square control box, open the battery cover, put batteries in with correct anode and cathode, then chuck the cover.
Package Details for Sunway LED Light Strip for Car Trunk:
1. Packing size (Blister L*W*H): 288*147*33MM (mark: 1pc/blister)
2. Inner size (L*W*H): 285*145*145MM (mark: 16pcs blister/inner box)
3. Carton size (L*W*H): 630*610*340MM (mark: 3 inner boxes/carton, total 48pcs)
4. Gross weight: 16.5Kg
1. Read the manual before installation.
2. For indoor use only.
3. Do not look directly at LEDs.
4. Don’t mix old and new batteries
5. Do not incinerate, compact, or disassemble batteries.
6. Don't contact with water!
7. Dispose of old batteries in accordance with local regulations.
1. Warranty: 2 years, any quality problems products within warranty will get maintenance or replacement unconditionally.
2. Your inquiry will be promptly replied within 24 hours.